This softkey opens the screen form in which the Executing the machining step program (Page 78) step program is actually
executed.
Changes the softkey function as follows.
From
to
5.1
Tool change in the machining step program
Functionality
You add a tool change step to the machining step program.
If the value of the display machine data 361 (USER_MEAS_TOOL_CHANGE) is 1, the tool number can be specified
manually; otherwise, the controller saves the active tool as machining step in the step program.
Operating sequences
Programming and Operating Manual (Manual Machine Plus (MM+), Turning)
01/2017
1.
You have opened a machining step program.
Move the cursor to the machining step after which the tool should be changed.
73