Siemens SINUMERIK 808D User Manual page 70

2.
Screen handling functions
● To select machine steps, press the <cursor up> or <cursor down> key on the PPU. The selected step is displayed on an
orange background.
● If you have selected a machining cycle, the input screen for this cycle or the taught block opens automatically when you
press the <cursor right> key.
Softkeys
Other inputs in the screen are made with softkeys:
Opens the following dialog box:
70
You can access the screen for input into the list by pressing this softkey in the main screen
for MM+.
Programming and Operating Manual (Manual Machine Plus (MM+), Turning)
01/2017