Changing The Feedrate/Spindle Value - Siemens SINUMERIK 808D User Manual

Operating sequences
Follow the sequence of operations below to enter the required tool number:
Please note the following for a manual tool change:
● The real tool change on the machine (tool relocation) is finished.
● The appropriate tool number (tool offset) must be communicated to the control by making a manual entry.
Note
A new tool number may be selected only if all axes and the spindle are stationary.
Note
The tool number entered in the T value field must correspond to the tool loaded into the machine; otherwise, the tool will
have to be recalibrated (see also section "Measuring tools (Page 6)"). An uncalibrated or incorrectly calibrated tool can
lead to dimensional errors or to incorrect cutting values.
4.2.7

Changing the feedrate/spindle value

Changing the operating sequence, feed rate "F"/spindle value "S"
Follow the sequence of operations below to enter the required feedrate or spindle value:
20
1. Move the cursor onto the input field for the T value.
2. Enter the tool number using the numeric keys.
(The tool you wish to select must be set up in the tool list.)
3. Accept the tool number by pressing this hardkey.
The following information text with the corresponding tool number is displayed:
Acknowledge this information text using this softkey.
4. Press this hardkey.
The tool number is changed.
1. Position the cursor on the input field for the value in the main screen for MM+.
Programming and Operating Manual (Manual Machine Plus (MM+), Turning)
01/2017