In the "Machining step program" function, you can toggle between the following horizontal softkey functions using the above
hardkey.
and
The two functions change from the machining step program into that screen form in which the actual machining step
program is to be executed:
The complete machining step program is executed with the following:
With the above softkey, the program is executed from the actual cursor position in the machining step program (step that is
marked in the program).
Operating sequences, executing the machining step program
The current machining status is displayed in the center of the execute screen. This status could be one of the following:
● Machining not started
● Machining active
● Machining aborted
● Machining interrupted
● Machining finished
Programming and Operating Manual (Manual Machine Plus (MM+), Turning)
79
01/2017