Preface - Siemens SINUMERIK 808D User Manual

Preface

Applicable products
This manual is valid for the following control systems:
Control system
SINUMERIK 808D ADVANCED T (Turning)
SINUMERIK 808D ADVANCED M (Milling)
SINUMERIK 808D (Turning)
SINUMERIK 808D (Milling)
Documentation components and target audience
End-user documentation
Programming and Operating Manual (Turning)
Programming and Operating Manual (Milling)
Programming and Operating Manual (ISO Turning/Milling)
Programming and Operating Manual (Manual Machine Plus
(MM+), Turning)
Diagnostics Manual
Manufacturer/service documentation
Commissioning Manual
Function Manual
Parameter Manual
Service Manual
Readme file
Third-party software - Licensing terms and copyright information
My Documentation Manager (MDM)
Under the following link you will find information to individually compile your documentation based on the Siemens content:
www.siemens.com/mdm
Standard scope
This manual only describes the functionality of the standard version. Extensions or changes made by the machine tool
manufacturer are documented by the machine tool manufacturer.
Technical support
Country Hotline
Germany +49 911 895 7222
China +86 400 810 4288
You can find more hotline information at the worldwide Web site given above.
1)
EC Declaration of Conformity
The EC Declaration of Conformity for the EMC Directive can be found on the Internet at
http://www.siemens.com/automation/service&support.
Here, enter the number "67385845" as the search term or contact your local Siemens office.
2
Further service contact information:
1)
Worldwide Web site:
•
https://support.industry.siemens.com/cs/ww/en/
Chinese Web site:
•
http://www.siemens.com.cn/808D
Software version
V4.7.4: PPU161.3/PPU160.2 with spindle/feed servo system
V4.7.4: PPU141.2 with feed servo system
Target audience
Programmers and operators of turning machines
Programmers and operators of milling machines
Programmers and operators of turning/milling machines
Programmers and operators of turning machines
Mechanical and electrical designers, commissioning engi-
neers, machine operators, and service and maintenance
personnel
Target audience
Installation personnel, commissioning engineers, and ser-
vice and maintenance personnel
Mechanical and electrical designers, technical professionals
Mechanical and electrical designers, technical professionals
Mechanical and electrical designers, technical profession-
als, commissioning engineers, and service and maintenance
personnel
Programming and Operating Manual (Manual Machine Plus (MM+), Turning)
01/2017