WARNING
Danger to life as a result of unsafe operating states resulting from software manipulation
Software manipulations (e.g. viruses, trojans, malware or worms) can cause unsafe operating states in your system that
may lead to death, serious injury, and property damage.
Keep the software up to date.
•
Incorporate the automation and drive components into a holistic, state-of-the-art industrial security concept for the
•
installation or machine.
Make sure that you include all installed products into the holistic industrial security concept.
•
Protect files stored on exchangeable storage media from malicious software by with suitable protection measures, e.g.
•
virus scanners.
2
Turning on, Reference Point Approach
Note
If the controller has already been preconfigured to Manual Machine Plus (MM+) by the machine manufacturer, the desired
operating area is activated once the controller has been started up.
This operating area runs only in SIEMENS mode instead of ISO mode.
Operating sequence
Note that if MD1105 = 1, after power on, the control system automatically opens the main screen for MM+.
Programming and Operating Manual (Manual Machine Plus (MM+), Turning)
01/2017
1.
Press this key on the machine control panel to open the "JOG" window.
5