Siemens SINUMERIK 808D User Manual page 15

Values displayed in the position display and T, F, S
Displayed values
In front of axis letters
+/-
S value/S type %
F value/F type %
T value
D value
INC value
Programming and Operating Manual (Manual Machine Plus (MM+), Turning)
01/2017
Meaning
Current traversing direction of axes
•
Programmed value for the spindle speed (rev/min)
•
in either "rev/min" or "m/min", depending on the settings for the machining technology data.
Current position of the spindle override switch in %.
•
Programmed feed value
•
in either "m/min" or "mm/Rev", depending on the settings for the machining technology data.
Current position of the feedrate override switch in %.
•
Tool number of the tool used
•
Tool offset applied
•
Handwheel pulse weighting setting
•
Feed stop as a result of:
•
– Feedrate override at position 0%.
– An alarm is active which prevents the axes from moving.
Spindle status
•
– Spindle counter-clockwise
– Spindle stop
– Spindle clockwise
15