Outside left:
4.4.7.2
Roughing cycle B
Functionality
The roughing cycle B function is used to produce a simple cutting contour, with an additional interpolation point allowing
beveled or tapered contours. Transitions to adjacent faces can again be worked as a radius or chamfer.
Operating sequences
Programming and Operating Manual (Manual Machine Plus (MM+), Turning)
01/2017
1.
You can access the turning cycle overview by pressing this softkey in the basic screen for
MM+.
2.
In the displayed screen, press this softkey.
Alternatively, you can select this function from the turning cycle overview with cursor keys
and activate it with this hardkey.
55