Siemens SINUMERIK 808D User Manual page 66

Parameter
x0
m2x
m2z
m1
NAME
Specification for transverse
axis
Softkeys
The cycle overview function lists all free contours contained in the machining step program.
To choose, place the cursor on the appropriate line and press the following softkey:
It is also possible to assign a contour of an external contour subroutine to the cycle.
66
Description
Outside diameter of the shaft to be machined in the transverse axis (absolute position of the
X axis in the diameter).
Finishing allowance horizontal to the contour.
Finishing allowance perpendicular to the contour.
Enter the maximum infeed depth for roughing. The internal infeed calculation ensures that
the infeed is as uniform as possible throughout the roughing operation. This entry value
represents the maximum value possible and is therefore not exceeded.
If an external contour has been selected, the path to the contour program is shown here.
The selected specification is displayed.
Programming and Operating Manual (Manual Machine Plus (MM+), Turning)
01/2017