Siemens SINUMERIK 808D User Manual page 38

Parameter
Parameter
Reference
Groove width
Diameter
38
Outer groove:
Inner groove:
Description
z0 Starting position for the groove. The edge of the groove facing the chuck is always
specified here. The value to be entered indicates the absolute position in the longitudi-
nal axis (Z axis).
l1 This value is the groove width, which together with the value for "Reference z0" speci-
fies the absolute position of the edge of the groove on the side of the groove facing
away from the spindle. If the groove width setting is the same as the tool width, and "0"
is assigned to the parameters "Edge F1" and "Edge F2" (selection between "CHF" and
"RND"), the tapping function is activated.
d Starting diameter for the groove. The value to be entered is the absolute position in the
transverse axis (X axis).
Programming and Operating Manual (Manual Machine Plus (MM+), Turning)
01/2017