Operating sequences
The following roughing cycles can be used via the vertical softkey bar or by choosing via cursor keys:
● Roughing cycle A - simple stepped contour
● Roughing cycle B - expanded stepped contour with beveled edges
● Roughing cycle C - expanded stepped contour with rounding
● Roughing cycle D - single radius
● Roughing cycle E - single taper
● Roughing cycle F - Face and longitudinal turning
● Roughing cycle - free contour
4.4.7.1
Roughing cycle A
Functionality
The roughing cycle A function is used to produce a simple stepped contour (step), with the option of working the transitions
to adjacent faces as a radius or chamfer.
Operating sequences
52
1.
Starting from the main menu for MM+ you can reach the roughing cycle functions via this
softkey.
1.
You can access the turning cycle overview by pressing this softkey in the basic screen for
MM+.
2.
In the displayed screen, press this softkey.
Programming and Operating Manual (Manual Machine Plus (MM+), Turning)
01/2017