Siemens SINUMERIK 808D User Manual page 76

76
The controller switches to the manual machining screen forms of axis-parallel turning, taper
turning and radius turning.
2. Traverse to a position that is to be taught in and press this softkey.
3. You can save the position with path feed with this softkey.
4. You can save the position with rapid traverse via this softkey.
After the control acknowledged the action with a screen message (for example, saying that
the block was inserted as N20), a new position could be traversed to and this is in turn
taught in using this softkey.
Programming and Operating Manual (Manual Machine Plus (MM+), Turning)
01/2017