Siemens SINUMERIK 808D User Manual page 30

30
3. This softkey will support you with the parameterization and execution of functions.
The actual position value of the relevant axis is transferred to the parameter input fields
when you press this softkey.
The input field must be selected with the cursor keys; otherwise, an error message is dis-
played when you accept the axis position, saying that the value cannot be accepted.
This softkey takes you back to the main screen.
If you have edited any values, the following prompt window appears:
4. Your inputs are accepted when you press this softkey.
Your inputs are discarded when you press this softkey.
5. The function was parameterized (for example, thread tapping).
Activate the function using this softkey.
The following execute screen appears:
The current machining status is displayed in the center of the execute screen. This status
could be one of the following:
Machining not started
•
Machining active
•
Machining aborted
•
Machining interrupted
•
Machining finished
•
6. Start machining using this hardkey.
The machining operation on the workpiece is executed.
Programming and Operating Manual (Manual Machine Plus (MM+), Turning)
01/2017