Setting-Up; Measuring Tools - Siemens SINUMERIK 808D User Manual

Note
The pictures in the parameterization screenforms depend on the setting of the machine data by the machine manufacturer,
that is, display of the tool position before or behind the center of rotation with regards to the turret head.
3

Setting-up

3.1

Measuring tools

Functionality
You can measure tools manually in the MM+ operating area. In this case, the manual tool measurement function accesses
the tool list data.
Note
To access the tool list, proceed as follows:
→
6
2. Press this softkey to open the MM+ operating area.
3. If the axes have not approached the reference point, press this key to change to the
"REF.POINT" window for reference point approaching operation; otherwise, skip this step.
For more information on reference point approaching, see Chapter "Switching on and refer-
encing" of the SINUMERIK 808D/SINUMERIK 808D ADVANCED Programming and Oper-
ating Manual (Turning).
4. Press this softkey to exit the operating area.
Programming and Operating Manual (Manual Machine Plus (MM+), Turning)
01/2017