AudioCodes Mediant 800B User Manual page 172

2. Click New; the following dialog box appears:
3. Configure an SRV rule according to the parameters described in the table below.
4. Click Apply, and then save your settings to flash memory.
Table 12-20: Internal SRV Table Parameter Descriptions
Parameter
General
Index
Domain Name
domain-name
[Srv2Ip_InternalDomain]
Transport Type
transport-type
[Srv2Ip_TransportType]
1st/2nd/3rd Entry
DNS Name (1-3)
dns-name-1|2|3
[Srv2Ip_Dns1/2/3]
Priority (1-3)
priority-1|2|3
[Srv2Ip_Priority1/2/3]
User's Manual
Figure 12-15: Internal SRV Table - Add Dialog Box
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines the host name to be translated.
The valid value is a string of up to 31 characters. By default, no
value is defined.
Defines the transport type.

[0] UDP (default)

[1] TCP

[2] TLS
Defines the first, second or third DNS A-Record to which the host
name is translated.
By default, no value is defined.
Defines the priority of the target host. A lower value means that it is
more preferred.
By default, no value is defined.
Mediant 800B Gateway & E-SBC
Description
172 Document #: LTRT-10632