AudioCodes Mediant 800B User Manual page 167

User's Manual
Application
SIP
SIP over TLS (SIPS)
Syslog
SNMP Traps
DNS client
NTP

To configure DiffServ (Layer-3 QoS) values per CoS:
1. Open the QoS Settings page (Setup menu > IP Network tab > Quality folder > QoS
Settings).
2. Click New; the following dialog box appears:
3. Configure DiffServ values per CoS according to the parameters described in the table
below.
4. Click Apply, and then save your settings to flash memory.
Parameter
Media Premium QoS
media-qos
[PremiumServiceClassMediaDiffServ]
Control Premium QoS
control-qos
[PremiumServiceClassControlDiffServ]
Version 7.2
Traffic / Network Types
Control
Control
Management
Management
Varies according to DNS settings:

OAMP

Control
Varies according to the interface
type associated with NTP (see
'Assigning NTP Services to
Application Types' on page 150):

OAMP

Control
Figure 12-11: Configuring Class of Service
Table 12-17: QoS Settings Parameter Descriptions
Defines the DiffServ value for Premium Media CoS content.
The valid range is 0 to 63. The default is 46.
Note: You can also configure the the parameter per IP
Profile (IpProfile_IPDiffServ) or Tel Profile
(TelProfile_IPDiffServ).
Defines the DiffServ value for Premium Control CoS content
(Call Control applications).
The valid range is 0 to 63. The default is 40.
Note: You can also configure the the parameter per IP
Class-of-Service (Priority)
Control Premium
Control Premium
Bronze
Bronze
Depends on traffic type:

Control: Control Premium

Management: Bronze
Depends on traffic type:

Control: Control Premium

Management: Bronze
Description
167 Mediant 800B Gateway & E-SBC
12. Network