AudioCodes Mediant 800B User Manual page 115

User's Manual
3. Configure the TLS Context according to the parameters described in the table below.
4. Click Apply, and then reset the device with a save-to-flash for your settings to take
effect.
Parameter
General
Index
tls <ID>
[TLSContexts_Index]
Name
name
[TLSContexts_Name]
TLS Version
tls-version
[TLSContexts_TLSVersion]
Version 7.2
Table 10-1: TLS Contexts Parameter Descriptions
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines a descriptive name, which is used when associating
the row in other tables.
The valid value is a string of up to 31 characters.
Defines the supported SSL/TLS protocol version. Clients
attempting to communicate with the device using a different
TLS version are rejected.

[0] Any - Including SSLv3 = (Default) SSL 3.0 and all TLS
versions are supported.

[1] TLSv1.0 = Only TLS 1.0.

[2] TLSv1.1 = Only TLS 1.1.

[3] TLSv1.0 and TLSv1.1 = Only TLS 1.0 and TLS 1.1.

[4] TLSv1.2 = Only TLS 1.2.

[5] TLSv1.0 and TLSv1.2 = Only TLS 1.0 and TLS 1.2.

[6] TLSv1.1 and TLSv1.2 = Only TLS 1.1 and TLS 1.2.

[7] TLSv1.0 TLSv1.1 and TLSv1.2 = Only TLS 1.0, TLS
1.1 and TLS 1.2 (excludes SSL 3.0).
10. Configuring SSL/TLS Certificates
Description
115 Mediant 800B Gateway & E-SBC