AudioCodes Mediant 800B User Manual page 56

Item #
1 Company logo.
2 Menu bar containing the menus.
3 Toolbar providing frequently required command buttons.

Save: Saves configuration changes to the device's flash memory (without
resetting the device). If you make a configuration change, the button is
surrounded by a red-colored border as a reminder to save your settings to flash
memory, by clicking the button.

Reset: Opens the Maintenance Actions page, which is used for performing
various maintenance procedures such as resetting the device (see 'Basic
Maintenance' on page 821). If you make a configuration change that takes effect
only after a device reset, the button is surrounded by a red-colored border as a
reminder to save your settings to flash memory with a device reset; otherwise,
your changes revert to previous settings if the device subsequently resets or
powers off.

Actions:






4 Alarm bell icon, which displays the number of active alarms generated by the device.
The color of the number of alarms display indicates the highest severity of an active
alarm. If you click the icon, the Active Alarms table is displayed. For more information
on the table, see Viewing Active Alarms.
5 Button displaying the username of the currently logged in user. If you click the button,
information of the logged-in user is displayed (see 'Viewing Logged-In User
Information' on page 84) and the Log Out button is provided to log out the Web
session (see 'Logging Off the Web Interface' on page 71).
6 Tab bar containing tabs pertaining to the selected menu:

Setup menu:




Monitor menu: Monitor

Troubleshoot menu: Troubleshoot
User's Manual
Table 6-1: Description of the Web GUI Areas
Configuration File: Opens the Configuration File page, which is used for
saving the ini file to a folder on your PC, or for loading an ini file to the device
(see 'Configuration File' on page 875).
Auxiliary Files: Opens the Auxiliary Files page, which is used for loading
Auxiliary files to the device (see 'Loading Auxiliary Files through Web
Interface' on page 832).
License Key: Opens the License Key page, which is used for installing a new
License Key file (see 'Installing License Key through Web Interface' on page
864).
Software Upgrade: Starts the Software Upgrade Wizard for upgrading the
device's software (see 'Software Upgrade Wizard' on page 869).
Switchover: Opens the High Availability Maintenance page, which is used for
switching between Active and Redundant devices (see High Availability
Maintenance on page 825).
Configuration Wizard: Opens the SBC Configuration Wizard, which is used
for quick-and-easy configuration of the device (see SBC Configuration Wizard
on page 899).
IP Network
Signaling & Media
Administration
Mediant 800B Gateway & E-SBC
Description
56 Document #: LTRT-10632