Web User Permissions; Print Commands; Figure 5-5: Group Settings Screen - AudioCodes MP-20 Series User Manual

User's Manual

To configure user groups:
1. On the 'Users' screen, under the Groups group, click New Group
Settings' screen appears.
2. In the 'Name' field enter a name for the group.
3. In the 'Description' field, enter a brief description of this group.
4. In the 'Group Members' list, select the users that you want to assign to this group.
5. Click OK.
The following is an example of the relevant Telnet parameter:
rg_conf/admin/group/0/name=Users
5.4.1

Web User Permissions

This sub-section describes the following commands for viewing and changing user
permissions via Telnet:


Print commands


Set commands
5.4.1.1 Print Commands
This section describes the Print commands used for viewing and changing user's
permissions.
5.4.1.1.1 Current User Roles
The example below shows the Print command for viewing current users. Note that each
user's role is bolded.
MP264> conf
conf> print admin/user
(user
(0
(enabled(1))
(username(admin))
Version 4.4.3

Figure 5-5: Group Settings Screen

45
5. Getting Started with the Web Interface
MP-20x Multimedia Home Gateway
icon; the 'Group