User's Manual
f.
On the 'Certificates' screen, click the Download
new self-signed certificate that you created; the 'File Download' window appears.
g.
Click Save, and then browse to the folder to where you want to save the file; the
file is saved as a *.crt file.
3.
Configure the Apache server, by configuring the SSLCACertificateFile parameter to
point to the location where the certificate file is located. Since this is a self-signed
certificate, you are also considered the CA.
4.
Load the self-signed certificate to the device:
a.
On the 'Certificates' screen, click the Upload Certificate link; the 'Load
MP202D's Local Certificate' screen appears.
b.
Click Browse, locate the certification file that you created, and then click Upload
to load the file.
Version 4.4.3
Figure 14-7: File Download Window
Figure 14-8: Load MP-20x's Local Certificate
211
14. Remote Device Management
icon corresponding to the
MP-20x Multimedia Home Gateway
Need help?
Do you have a question about the MP-20 Series and is the answer not in the manual?