Menu Bar Description; Table 5-1: Menu Description - AudioCodes MP-20 Series User Manual

5.2

Menu Bar Description

The Web interface screens are conveniently grouped into related themes under specific
menus. These menus are located in the menu bar. The table below describes these
menus.
Menu
Home Displays the Map View (refer to Chapter
Quick Setup Displays the 'Quick Setup' screen for quickly setting up an Internet connection with
the device (see Section
Network Displays the 'Network Connections' screen for configuring network connections:
Connections

LAN (see Section

WAN (see Chapter

VLANs (see Section

LAN-WAN bridging (see Section
Security Displays the 'Security' screen for configuring security-related features such as
Website restrictions (see Chapter
Voice Over IP Displays the 'Voice Over IP' screen for configuring the VoIP parameters to use the
device's VoIP functionality to place and receive calls over the Internet using a
standard telephone set.
QoS Displays the 'Quality Of Service' screen for configuring Quality of Service (QoS)
for the device (see Chapter
Advanced Displays the 'Advanced' screen for configuring system parameters (e.g., DHCP
server and DNS) and for administrative functions (e.g., changing password, setting
date and time, and upgrading the system).
Icon
User's Manual

Table 5-1: Menu Description

8.1 on page 65).
12.2 on page 147)
12 on page 133)
12.4 on page 162)
15
11 on page 115).
Name
3G USB
About MP20x
Certificates
Configuration
File
38
MP-20x Multimedia Home Gateway
Description
6 on page 61).
12.5 on page 170)
on page 237).
Description
Displays 3G dongle status and 3G dongle
access codes (see Section
Displays technical information about the
device, including version number (see
Section 20.2 on page 301).
Manages digital certificates (see
Section 14.3 on page 209).
Loads the Configuration File to the device
(see Section 20.4 on page 305).
Note: You can hide the Configuration File
icon, by running the following CLI
command in a Telnet session with the
device:
conf_set
rmt_config/hide_config_file_page
1. This is useful, for example, in scenarios
where you want to prevent a user
accessing the Web interface to change the
Document #: LTRT-50614
3.2.3 page 29).