AudioCodes MP-20 Series User Manual page 235
Cpe & access gateway products, multimedia home gateway
Hide thumbs
Also See for MP-20 Series:
- Release notes (22 pages) ,
- Frequently asked questions manual (20 pages) ,
- Quick manual (22 pages)
Table of Contents
Advertisement
User's Manual
Add the relevant parameter (see below) on the device's WAN interface to the configuration
file located in TFTP directory. The file is downloaded only once and after that, the device
no longer declares Options 66 and 67.
The following needs to be added to the configuration to disable DHCP Options 66 and 67:
rg_conf/dev/eth1/dhcpc/options_66_67_disabled=1
To return to the default behavior, either remove this parameter or set the parameter to "0":
rg_conf/dev/eth1/dhcpc/options_66_67_disabled=0
Version 4.4.3
14. Remote Device Management
235
MP-20x Multimedia Home Gateway
- Quick Links:
- Logging in to Mp-20X Web Interface
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MP-20 Series and is the answer not in the manual?