4.11 MEASure Group
The commands in this group deal with measurement conditions. You can make the same settings and
inquiries as when the MODE key on the front panel is used.
:MEASure
:
:MEASure?
Function
Queries all settings related to the measurement
conditions.
Syntax
:MEASure?
Example
:MEASURE?
-> :MEASURE:MODE HHISTOGRAM;
FUNCTION PERIOD,A;SLOPE RISE
IM 704510-17E
;
FUNCtion
<Space>
?
MODE
<Space>
?
POLarity
<Space>
?
SLOPe
<Space>
?
?
PERiod
,
A
PWIDth
B
TI
AB
PPERiod
PTI
PWTI
PWPW
TSTamp
HHIStogram
ISI
POSitive
NEGative
BOTH
RISE
,
RISE
FALL
FALL
BOTH
:MEASure:FUNCtion
Function
Sets the measurement function or queries the
current setting.
Syntax
:MEASure:FUNCtion
{PERiod|PWIDth|TI|PPERiod|PTI|PWTI|
PWPW},{A|B|AB}
:MEASure:FUNCtion?
Example
:MEASURE:FUNCTION PERIOD,A
:MEASURE:FUNCTION?
-> :MEASURE:FUNCTION PERIOD,A
Description • "A|B" can be specified for the second
parameter when measuring period or pulse
width.
• Only AB can be specified for the second
parameter when measuring A-to-B time
interval (TI), period A & period B (PPERiod),
period A & A-to-B time interval (PTI), pulse
width A & A-to-B time interval (PWTI), pulse
width A & pulse width B (PWPW).
• "PWIDth|PWTI|PWPW" can be specified
when the sampling mode is set to inter-
symbol interference analysis.
4.11 MEASure Group
4-55
4