Table of Contents
Advertisement
Command
:IHIStogram:MULTi:FREQuency
:IHIStogram:MULTi:OFFSet
:IHIStogram:MULTi:SIZE
:IHIStogram:MULTi:TVALue
:IHIStogram:MULTi:UPDate
:IHIStogram:MULTi:WINDow<x>?
:IHIStogram:MULTi:WINDow<x>:HORizontal?
:IHIStogram:MULTi:WINDow<x>:HORizontal:CENTer
:IHIStogram:MULTi:WINDow<x>:HORizontal:SPAN
:IHIStogram:MULTi:WINDow<x>:LABel
:IHIStogram:MULTi:WINDow<x>:MARKer?
:IHIStogram:MULTi:WINDow<x>:MARKer:{LEFT|RIGHt}
:IHIStogram:POLarity
:IHIStogram:SYNC
:IHIStogram:TARGet
:IHIStogram:TMODe
:IHIStogram:TRIGger
INPut Group
:INPut?
:INPut:{ACHannel|BCHannel}?
:INPut:{ACHannel|BCHannel}:COUPling
:INPut:{ACHannel|BCHannel}:IMPedance
:INPut:{ACHannel|BCHannel}:TRIGger?
:INPut:{ACHannel|BCHannel}:TRIGger:LEVel
:INPut:{ACHannel|BCHannel}:TRIGger:MODE
:INPut:AGATe?
:INPut:AGATe:LEVel
:INPut:BCHannel:PHASe?
:INPut:BCHannel:PHASe:ADJust
:INPut:INHibit?
:INPut:INHibit:LEVel
MEASure Group
:MEASure?
:MEASure:FUNCtion
:MEASure:MODE
:MEASure:POLarity
:MEASure:SLOPe
MEMory Group
:MEMory?
:MEMory:BLOCk
:MEMory:BSIZe?
:MEMory:BYTeorder
:MEMory:CLEar
:MEMory:DATaselect
:MEMory:END
:MEMory:FORMat
:MEMory:SEND<x>?
:MEMory:SIZE<x>?
IM 704510-17E
Function
Sets constant T using the frequency format or queries the current setting.
Sets the offset value on constant T or queries the current setting.
Sets the number of windows or queries the current setting.
Sets the constant T value or queries the current setting.
Changes the window setting based on the constant T and offset values.
Queries all settings related to the specified window.
Queries all settings related to the horizontal axis (X-axis) of the specified
window.
Sets the center position of the horizontal axis (X-axis) of the specified
window.
Sets the span of the horizontal axis (X-axis) of the specified window.
Sets the window label or queries the current setting.
Queries all settings related to the horizontal axis (X-axis) marker of the
specified window.
Sets the marker position of the specified window or queries the current
setting.
Sets the polarity or queries the current setting.
Turns ON/OFF the Sync function or queries the current setting.
Sets the analysis target or queries the current setting.
Sets the trigger mode or queries the current setting.
Sets the trigger condition or queries the current setting.
Queries all settings related to the input.
Queries all settings related to the specified channel.
Sets the coupling of the specified channel or queries the current setting.
Sets the input impedance of the specified channel or queries the current
setting.
Queries all settings related to the trigger of the specified channel.
Sets the trigger level of the specified channel or queries the current setting.
Sets the trigger mode of the specified channel or queries the current setting. 4-53
Queries all settings related to arming and external gate.
Sets the arming/gate level or queries the current setting.
Queries all settings related to the CH B phase adjustment.
Sets the phase adjustment time of CH B or queries the current setting.
Queries all settings related to inhibit.
Sets the inhibit level or queries the current setting.
Queries all settings related to the measurement conditions.
Sets the measurement function or queries the current setting.
Sets the sampling mode or queries the current setting.
Sets the pulse width polarity or queries the current setting.
Sets the slope of the period/A-to-B time interval or queries the current setting. 4-56
Queries all settings related the external transmission of the measured data.
Sets the target block for block sampling or queries the current setting.
Queries the number of blocks in which the measurements are valid.
Sets the transmission order of binary data or queries the current setting.
Clears the measured data.
Sets the data to be transmitted or queries the current setting.
Sets the data position of transmission end or queries the current setting.
Sets the format of the data to be transmitted or queries the current setting.
Executes the transmission of the measured data specified by
"MEMory:DATaselect."
Queries the number of data points that have been measured.
4.1 List of Commands
Page
4-48
4-49
4-49
4-49
4-49
4-49
4-49
4-49
4-49
4-50
4-50
4-50
4-50
4-50
4-50
4-50
4-51
4-52
4-52
4-53
4-53
4-53
4-53
4-53
4-53
4-53
4-53
4-54
4-54
4-55
4-55
4-56
4-56
4-57
4-57
4-57
4-57
4-57
4-58
4-58
4-58
4-58
4-59
4-5
4
Advertisement
Table of Contents
