Table of Contents
Advertisement
:DISPlay:GRAPhsize
Function
Sets the size of the graph display or queries the
current setting.
Syntax
:DISPlay:GRAPhsize {FULL|HALF}
:DISPlay:GRAPhsize?
Example
:DISPLAY:GRAPHSIZE FULL
:DISPLAY:GRAPHSIZE?
-> :DISPLAY:GRAPHSIZE FULL
:DISPlay:GRID
Function
Turns ON/OFF the grid display on the time
variation display or queries the current setting.
Syntax
:DISPlay:GRID {<Boolean>}
:DISPlay:GRID?
Example
:DISPLAY:GRID ON
:DISPLAY:GRID?
-> :DISPLAY:GRID 1
:DISPlay:ITEM
Function
Sets the display format or queries the current
setting.
Syntax
:DISPlay:ITEM {HISTogram|LIST|
STATistic|TVARiation}
:DISPlay:ITEM?
Example
:DISPLAY:ITEM HISTOGRAM
:DISPLAY:ITEM?
-> :DISPLAY:ITEM HISTOGRAM
Description • "TVARiation" cannot be specified when the
sampling mode is set to hardware histogram.
• When the sampling mode is set to inter-
symbol interference analysis, only
"HISTogram|LIST" can be specified.
IM 704510-17E
:DISPlay:OVERlap
Function
Sets whether to overlap the histograms of both
polarities when measuring both pulse widths or
both edges on the histogram display or queries
the current setting.
Sets whether to overlap the waveforms of
measurement 1 and measurement 2 on the time
variation display or queries the current setting.
Syntax
:DISPlay:OVERlap {<Boolean>}
:DISPlay:OVERlap?
Example
:DISPLAY:OVERLAP ON
:DISPLAY:OVERLAP?
-> :DISPLAY:OVERLAP 1
Description • Setting is possible when displaying
histograms, measuring both pulse width or
both edges, and
":CALCulation:POLarity" is set to
"POSitive|NEGative|POSNeg".
• Setting is possible when displaying time
variation and measuring period A & period B,
period A & A-to-B time interval, pulse width A
& A-to-B time interval, and pulse width A &
pulse width B.
• For details, see chapter 7 in the TA720 User's
Manual .
:DISPlay:PANorama[:STATe]
Function
Turns ON/OFF the panorama display or queries
the current setting.
Syntax
:DISPlay:PANorama[:STATe]
{<Boolean>}
:DISPlay:PANorama:STATe?
Example
:DISPLAY:PANORAMA:STATE ON
:DISPLAY:PANORAMA:STATE?
-> :DISPLAY:PANORAMA:STATE 1
Description Settings is possible when displaying histograms
or time variation.
:DISPlay:SGRaph
Function
Sets whether to display STATistic, DEViation, or
SDEViation at the bottom section of the screen
when using ALL display on the multi window or
auto window or queries the current setting.
Syntax
:DISPlay:SGRaph {STATistic|
DEViation|SDEViation}
:DISPlay:SGRaph?
Example
:DISPLAY:SGRAPH DEVIATION
:DISPLAY:SGRAPH?
-> :DISPLAY:SGRAPH DEVIATION
Description Setting is possible when displaying histograms,
multi window or auto window is enabled, and
":DISPlay:WINDow" is set to "ALL".
4.5 DISPlay Group
4
4-29
Advertisement
Table of Contents
