Table of Contents
Advertisement
:HCOPy:ANAMing
Function
Turns ON/OFF the auto naming function of file
names when saving screen images to files or
queries the current setting.
Syntax
:HCOPy:ANAMing {<Boolean>}
:HCOPy:ANAMing?
Example
:HCOPY:ANAMING ON
:HCOPY:ANAMING?
-> :HCOPY:ANAMING 1
:HCOPy:COMMent
Function
Sets the comment at the top left section of the
screen or queries the current setting.
Syntax
:HCOPy:COMMent {<Character string>}
:HCOPy:COMMent?
<Character string>=Comment (Up to
25 characters.
User's Manual.)
Example
:HCOPY:COMMENT "SAMPLE"
:HCOPY:COMMENT?
-> :HCOPY:COMMENT "SAMPLE"
:HCOPy:COMPression
Function
Turns ON/OFF the compression when saving
the screen image in BMP format or queries the
current setting.
Syntax
:HCOPy:COMPression {<Boolean>}
:HCOPy:COMPression?
Example
:HCOPY:COMPRESSION ON
:HCOPY:COMPRESSION?
-> :HCOPY:COMPRESSION 1
:HCOPy:DEVice
Function
Sets the output destination of the screen image
or queries the current setting.
Syntax
:HCOPy:DEVice {PRINter|DRIVe}
:HCOPy:DEVice?
Example
:HCOPY:DEVICE PRINTER
:HCOPY:DEVICE?
-> :HCOPY:DEVICE PRINTER
Description If "DRIVe" is specified, the screen image is
output to the drive specified by
":HCOPy:DRIVe".
IM 704510-17E
See the TA720
:HCOPy:DRIVe
Function
Sets the target drive.
Syntax
:HCOPy:DRIVe {FD0|CA0[,<NRf>]|ND0}
FD0: Floppy disk drive
CA0: PC card drive
<NRf>=Partition (0 to 3)
ND0: Network drive
Example
:HCOPY:DRIVE FD0
Description • Sets the output destination drive when
":HCOPy:DEVice" is set to "DRIVe".
• PC card drive and network drive can be
specified only on models supporting them.
• If the PC card drive does not contain
partitions, omit the <NRf> corresponding to
partitions.
:HCOPy:CDIRectory
Function
Changes the current directory.
Syntax
:HCOPy:CDIRectory {<Character
string>}
Example
:HCOPy:CDIRECTORY "NO_1"
:HCOPy[:EXECute]
Function
Executes the printout of the screen image.
Syntax
:HCOPy[:EXECute]
Example
:HCOPY:EXECUTE
:HCOPy:FILename
Function
Sets the name of the file for saving the screen
image or queries the current setting.
Syntax
:HCOPy:FILename {<Character
string>}
:HCOPy:FILename?
<Character string>=File name (Up to
8 characters.
Manual.)
Example
:HCOPY:FILENAME "KEEP"
:HCOPY:FILENAME?
-> :HCOPY:FILENAME "KEEP"
:HCOPy:FORMat
Function
Sets the format for saving the screen image or
queries the current setting.
Syntax
:HCOPy:FORMat {BMP|TIFF|POSTscript}
:HCOPy:FORMat?
Example
:HCOPY:FORMAT BMP
:HCOPY:FORMAT?
-> :HCOPY:FORMAT BMP
:HCOPy:TONE
Function
Sets the color/gradation for saving the screen
image or queries the current setting.
Syntax
:HCOPy:TONE {BW|GRAY|COLor|RCOLor}
Example
:HCOPY:TONE BW
:HCOPY:TONE?
-> :HCOPY:TONE BW
4.7 HCOPy Group
See the TA720 User's
4-35
4
Advertisement
Table of Contents
