YOKOGAWA TA720 User Manual page 29

4.1 List of Commands
Command
:MEMory:STARt
RECall Group
:RECall
SAMPle Group
:SAMPle?
:SAMPle:ARMing?
:SAMPle:ARMing:DELay?
:SAMPle:ARMing:DELay:{AEVentsize|BEVentsize|EVENtsize}
:SAMPle:ARMing:DELay:{ATIMe|BTIMe|TIME}
:SAMPle:ARMing:DELay[:MODE]
:SAMPle:ARMing:SLOPe
:SAMPle:ARMing:SOURCe
:SAMPle:BLOCk?
:SAMPle:BLOCk:REST?
:SAMPle:BLOCk:REST:EVENt
:SAMPle:BLOCk:REST[:MODE]
:SAMPle:BLOCk:REST:TIME
:SAMPle:BLOCk:SIZE
:SAMPle:BLOCk[:STATe]
:SAMPle:GATE?
:SAMPle:GATE:EVENtsize
:SAMPle:GATE[:MODE]
:SAMPle:GATE:POLarity
:SAMPle:GATE:TIME
:SAMPle:INHibit
:SAMPle:INTerval
:SAMPle:RCLock
SSTart Group
:SSTart
STARt Group
:STARt
STATus Group
:STATus?
:STATus:CONDition?
:STATus:EESE
:STATus:EESR?
:STATus:ERRor?
:STATus:FILTer<x>
:STATus:QMESsage
STOP Group
:STOP
STORe Group
:STORe
SYSTem Group
:SYSTem?
:SYSTem:BEEP
:SYSTem:CLICksound
:SYSTem:DATE
:SYSTem:LCD?
:SYSTem:LCD:AOFF
:SYSTem:LCD:ATIMe
:SYSTem:LCD:BRIGhtness
:SYSTem:LCD[:STATe]
:SYSTem:TIME
:SYSTem:WARNing
4-6
Function
Sets the data position of transmission start or queries the current setting.
Recalls the setup data.
Queries all settings related to sampling.
Queries all settings related to arming.
Queries all settings related to arming delay.
Sets the arming delay event of the specified channel or queries the current
setting.
Sets the arming delay time of the specified channel or queries the current
setting.
Sets the arming delay mode or queries the current setting.
Sets the arming slope or queries the current setting.
Sets the arming source or queries the current setting.
Queries all settings related to block sampling.
Queries all settings related to block sampling rest.
Sets the rest time of block sampling in terms of the number of events or
queries the current setting.
Sets the block sampling rest mode or queries the current setting.
Sets the block sampling rest time or queries the current setting.
Sets the number of blocks of block sampling or queries the current setting.
Turns ON/OFF block sampling or queries the current setting.
Queries all settings related to the gate.
Sets the gate in terms of the number of events or queries the current setting. 4-63
Sets the gate type or queries the current setting.
Sets the polarity of the external gate or queries the current setting.
Sets the gate time in terms of time or queries the current setting.
Sets the polarity of inhibit input or queries the current setting.
Sets the sampling interval or queries the current setting.
Sets reference sampling clock or queries the current setting.
Executes single measurement.
Starts the measurement.
Queries all settings related to the communication status.
Queries the contents of the condition register.
Sets the extended event enable register or queries the current setting.
Queries the content of the extended event register and clears the register.
Queries the error code and message information.
Sets the transition filter or queries the current setting.
Sets whether or not to attach message information to the response to the
":STATus:ERRor?" query or queries the current setting.
Stops the measurement.
Stores the setup data.
Queries all settings related to the SYSTem group.
Turns ON/OFF the beep sound or queries the current setting.
Turns ON/OFF the click sound or queries the current setting.
Sets the date or queries the current setting.
Queries all settings related to the LCD.
Turns ON/OFF the auto off function of the LCD or queries the current setting. 4-68
Sets the auto off time of the LCD or queries the current setting.
Sets the brightness of the LCD or queries the current setting.
Turns ON/OFF the LCD backlight or queries the current setting.
Sets the time or queries the current setting.
Turns ON/OFF the warning display or queries the current setting.
Page
4-59
4-59
4-61
4-61
4-61
4-62
4-62
4-62
4-62
4-62
4-62
4-62
4-63
4-63
4-63
4-63
4-63
4-63
4-64
4-64
4-64
4-64
4-64
4-64
4-64
4-64
4-65
4-65
4-65
4-65
4-65
4-65
4-65
4-66
4-66
4-67
4-67
4-68
4-68
4-68
4-68
4-68
4-68
4-68
4-68
IM 704510-17E