YOKOGAWA TA720 User Manual page 79

4.11 MEASure Group
:MEASure:MODE
Function Sets the sampling mode or queries the current
setting.
Syntax :MEASure:MODE
{TSTamp|HHIStogram|ISI}
:MEASure:MODE?
Example :MEASURE:MODE HHISTOGRAM
:MEASURE:MODE?
-> :MEASURE:MODE HHISTOGRAM
:MEASure:POLarity
Function Sets the pulse width polarity when measuring
pulse width, pulse width A & A-to-B time
interval, or pulse width B or queries the current
setting.
Syntax :MEASure:POLarity
{POSitive|NEGative|BOTH}
:MEASure:POLarity?
Example :MEASURE:POLARITY POSITIVE
:MEASURE:POLARITY?
-> :MEASURE:POLARITY POSITIVE
Description Querying is possible when measuring pulse
width A & A-to-B time interval or pulse width A &
pulse width B.
4-56
:MEASure:SLOPe
Function Sets the slope when measuring the period, A-to-
B time interval, period A & period B, period A &
A-to-B time interval, or pulse width A & A-to-B
time interval or queries the current setting.
Syntax :MEASure:SLOPe
[{RISE|FALL|BOTH},]{RISE|FALL}
:MEASure:SLOPe?
Example When measuring the period
:MEASURE:SLOPE RISE
:MEASURE:SLOPE?
-> :MEASURE:SLOPE RISE
When measuring the A-to-B time interval
:MEASURE:SLOPE BOTH,RISE
:MEASURE:SLOPE?
-> :MEASURE:SLOPE BOTH,RISE
When measuring period A & period B
:MEASURE:SLOPE FALL,FALL
:MEASURE:SLOPE?
-> :MEASURE:SLOPE FALL,FALL
When measuring period A & A-to-B time
interval
:MEASURE:SLOPE FALL,RISE
:MEASURE:SLOPE?
-> :MEASURE:SLOPE FALL,RISE
When measuring pulse width A & A-to-B
time interval
:MEASURE:SLOPE?
-> :MEASURE:SLOPE BOTH,RISE
Description • Specify only the second parameter when
measuring the period.
• "RISE,RISE" or "FALL,FALL" can be
specified when measuring period A & period
B.
• "RISE,RISE" or "FALL,RISE" can be
specified when measuring period A & A-to-B
time interval.
• "BOTH,RISE" or "Both,FALL" can be
specified when the sampling mode is set to
time stamp or hardware histogram and pulse
width A & A-to-B time interval is measured.
IM 704510-17E