Table of Contents
Advertisement
2.4 Setting the TA720
2.4 Setting the TA720
Procedure
2-4
• Selecting the Communication Interface
1.
Press the UTILITY key to display the Utility menu.
2.
Press the Device soft key to display the Device selection menu.
3.
Press the Ethernet soft key.
Note
Only the communication interface selected by Device is enabled. The TA720 does not accept
commands that are transmitted using an unselected GP-IB communication interface.
• Setting the User Name, Password, and Timeout
4.
Press the Account soft key.
The user verification dialog box opens.
5.
Turn the rotary knob to move the cursor onto the User Name.
6.
Press the SELECT key to display the keyboard.
7.
Enter the user name. Specify anonymous if you wish to allow access to all
users. To restrict access, enter the user name using up to 15 characters.
8.
Turn the rotary knob to move the cursor to Password.
9.
Press the SELECT key to display the keyboard.
10.
Enter the password using up to 15 characters.
11.
Turn the rotary knob to move the cursor onto the Time Out.
12.
Press the SELECT key.
13.
Set the timeout time using the rotary knob or numeric keys.
14.
Press the SELECT key to confirm the new settings.
IM 704510-17E
Advertisement
Table of Contents
