Table of Contents
Advertisement
2. General
Image 2-11
HDF WLP series flight case (R9854510).
The dimensions of the HDF WLP series flight case are optimal for maximum utilization of the floor area of a truck. The cover of the
HDF WLP series flight case has four stacking dishes, which allows to stack the flight cases.
Image 2-12
W
ARNING
C
AUTION
2.5
Flight case for cooler unit
Introduction of the cooler unit flight case
It is recommended to use a flight case to ensure a safe and secure transportation of the external cooling unit of HDF series projector.
There is no flightcase explicitly dedicated for the cooler unit transportation, but the RLM W-series flight case, also provided by Barco,
can be use to fulfill this task.
2.6
Projector configurations
The drawings used in this chapter are not contractual. For convenience some options available in the HDF
WLP series projectors (e.g. standalone cooling unit in the laser version), are not shown here.
The different configurations
Depending on the installation the projector can be mounted in different ways, the 4 different configurations are:
22
2400 mm
:
Maximum stack two (2) HDF series projector flight cases high. Never higher.
:
Prior to inserting projector in flight case turn in the adjustable feet and interlocking adapters fully.
R5906730 HDF WLP SERIES 01/08/2017
Advertisement
Table of Contents
