Start Up The Image Adjustments; Image Settings; Contrast - Barco HDF-W30LP User And Installation Manual

14. Image

14.2 Start up the Image adjustments

Start up
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Image
The Image adjustment menu is displayed.
Image 14-1
Image adjustments

14.3 Image settings

About image settings
Depending on the type of the connected source, some settings are grayed out
Image settings are stored per input.

14.3.1 Contrast

About Contrast
The contrast function is used to adjust the contrast between the light and the dark areas of the displayed image. It applies a gain to
the red, green and blue signals.
Contrast adjustment can be done with the Contrast key on the RCU or via the menu structure.
134
Image file service
Save custom settings
Splash image
Total vertical lines
Active lines
Vertical start
Advanced settings
Press Auto Image for new
measurement
Manual load
File load filter
Delete
Delete all
Rename
Copy
Options
On or Off
Timeout(sec)
R5906730 HDF WLP SERIES 01/08/2017
Clamp delay
Clamp width