21.8 Inserting an input module
W
ARNING
How to insert
1. Loosen both screws of the dummy cover plate (1).
1
Image 21-8
Insert input module
2. Take off the dummy cover plate.
3. Insert the new input module in its compartment.
Make sure the module seats in its sliders (2).
Pull in the module until the contacts (3) are fully inserted into the connectors.
4. Fixate both fixation screws.
1
Image 21-9
Fixate input
R5906730 HDF WLP SERIES 01/08/2017
:
Switch off the projector and unplug the power cord before starting the procedure.
21. Maintenance procedures
2
3
277