Table of Contents
Advertisement
Image 14-8
Jittering on image
Phase adjustment can be done with the Phase key on the RCU or via the menu structure.
How to adjust
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Image → Image Settings →
Phase.
Image 14-9
Image settings, phase
2. Press ENTER to select.
Image 14-10
Phase adjustment
3. To change the value directly in the Image Settings window, use the ◄ or ► key or a numeric key 0-9, to adjust as a % of the full
range.
To adjust via the bar scale menu, press ENTER to display the Phase menu and adjust with the ◄ or ► key. Press ENTER again
to enter the value directly with the numeric keys. Press EXIT to return to Image Settings menu.
14.3.5 Color temperature (fixed values)
Color temperature
The coloration (reddish, white, bluish, greenish, etc.) of white in an image, measured using the Kelvin (degrees K)
temperature scale. Higher temperatures output more light.
Projector white will provide maximum projector light output. The calibrated 'Broadcast', 'Film', 'Video' and
'Computer' presets will provide optimum color tracking.
R5906730 HDF WLP SERIES 01/08/2017
14. Image
137
Advertisement
Table of Contents
