Table of Contents
Advertisement
6. Physical installation stand alone cooler
Image 6-24
3. Fixate the second U-bracket to the frame with only one screws (M5x8) as shown in the following drawing. There is a space of
more or less 2 centimeters between the frame side and the bracket.
Note: The two U-Brackets are not fixed in same manner. Here, the concerned U-bracket, is situated in the lower right corner of
the housing when you look at the device on the side of the cooler inputs.
Image 6-25
4. Fixate the bracket situated to the backside of the cooler housing with only one screws (M5x8) each.
Image 6-26
50
+/- 2cm
R5906730 HDF WLP SERIES 01/08/2017
Advertisement
Table of Contents
