18. Projector Control
Image 18-8
Wired DHCP
2. Use the ▲ or ▼ key to select DHCP under Wired and press ENTER to toggle between [On] or [Off].
[On] : DHCP is activated. An automatic IP address is assigned.
[Off] : DHCP is deactivated. A fixed address must be used.
18.6.3 Wired IP address set up
How to set up
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Projector Control → Network.
Image 18-9
IP address
2. Use the ▲ or ▼ key to select IP Address under Wired and press ENTER to activate the input box.
226
R5906730 HDF WLP SERIES 01/08/2017