Table of Contents
Advertisement
17. Alignment
17.7.24 Alternative Side Keystone
About the alternative side keystone
For 3D sources with a frequency higher than 30 Hz/eye, the warp unit cannot be used anymore. Therefor, for these source the
alternative side keystone can be used.
How to adjust
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Alignment → Warping →
.Alternative Side Keystone.
Image 17-57
Alternative side keystone
2. Use the ▲ or ▼ key to adjust the keystone.
17.7.25 Alternative Side Keystone
About the alternative side keystone
For 3D sources with a frequency higher than 30 Hz/eye, the warp unit cannot be used anymore. Therefor, for these source the
alternative side keystone can be used.
How to adjust
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Alignment → Warping →
.Alternative Side Keystone.
Image 17-58
Alternative side keystone
2. Use the ▲ or ▼ key to adjust the keystone.
17.8 Blanking adjustment
What can be done ?
Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on to the screen and
to hide or black out unwanted information (or noise). A '0' on the bar scale indicates no blanking.
198
R5906730 HDF WLP SERIES 01/08/2017
Advertisement
Table of Contents
