Wireless Subnet Mask Set Up - Barco HDF-W30LP User And Installation Manual

Image 18-27
Wireless IP address input
3. Press ENTER to open the Wireless menu.
4. Use the ▲ or ▼ key to change the selected character.
Use the ◄ or ► key to select another character.
Note: Digits can be entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be selected automatically.

18.6.10 Wireless subnet mask set up

Can only be used with a wireless network module installed.
Subnet for Wired and Wifi must be different !
How to set up
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Projector Control → Network
→ Wireless Setup.
Image 18-28
Network, wireless
2. Press ENTER to open the Wireless menu.
3. Use the ▲ or ▼ key to select Subnet Mask and press ENTER to activate the input box.
R5906730 HDF WLP SERIES 01/08/2017
Image 18-29
Network, wireless Subnet Mask
18. Projector Control
233