17. Alignment
Image 17-8
Calibrate lens
A Lens Calibration window opens. Select first the desired calibration options by checking the check box before the option and
then select Yes to start the calibration procedure.
Image 17-9
Calibrate lens confirmation
17.7 Warping
Not all models are equipped with a warping unit. For these models, the warping unit is optional.
Overview
•
About warping
•
Warp activation - deactivation
•
Start up manual adjustment
•
Warp adjustment principle
•
Setting the warping level
•
Warp adaptation steps
•
Making selections and adjustments
•
Keystone correction workflow
•
Linearity adjustment, workflow
•
Selecting and changing the position of a specific point
•
Scaling the image
•
Shifting the image
•
Rotating the image
•
Hardware Reset
•
OSD opacity
•
Warp file service, load file
•
Warp file service, save to file
•
Warp file service, save as
•
Warp file service, rename file
•
Warp file service, delete file
•
Warp file service, delete all files
•
Warp board reset
180
R5906730 HDF WLP SERIES 01/08/2017