Alcatel-Lucent 7450 ESS Series Configuration Manual page 98

mc-maximum-routes
Syntax
Context
Description
Default
Parameters
multicast-info
Syntax
Context
Description
Parameters
network-domains
Syntax
Context
Description
Page 98
mc-maximum-routes number [log-only] [threshold threshold]
no mc-maximum-routes
config>router
This command specifies the maximum number of multicast routes that can be held within a VPN
routing/forwarding (VRF) context. When this limit is reached, a log and SNMP trap are sent. If the
log-only parameter is not specified and the maximum-routes value is set below the existing number
of routes in a VRF, then no new joins will be processed.
The no form of the command disables the limit of multicast routes within a VRF context. Issue the no
form of the command only when the VPRN instance is shutdown.
no mc-maximum-routes
number — Specifies the maximum number of routes to be held in a VRF context.
Values
1 — 2147483647
log-only — Specifies that if the maximum limit is reached, only log the event. log-only does not
disable the learning of new routes.
threshold threshold — The percentage at which a warning log message and SNMP trap should be
sent.
Values
0 — 100
Default 10
multicast-info-policy policy-name
no multicast-info-policy
configure>router
This command configures multicast information policy.
policy-name — Specifies the policy name.
Values 32 chars max
network-domains
config>router
This command opens context for defining network-domains. This command is applicable only in the
base routing context.
7450 ESS OS Router Configuration Guide