Table of Contents
Advertisement
Default
Parameters
unnumbered
Syntax
Context
Description
Parameters
Default
Page 138
functions. The profile of a packet is either derived from ingress classification or ingress policing.
The default marking state for network IP interfaces is trusted. This is equivalent to declaring no tos-
marking-state on the network IP interface. When undefined or set to tos-marking-state trusted, the
trusted state of the interface will not be displayed when using show config or show info unless the
detail parameter is given. The save config command will not store the default tos-marking-state
trusted state for network IP interfaces unless the detail parameter is also specified.
The no form of the command is used to restore the trusted state to a network IP interface. This is
equivalent to executing the tos-marking-state trusted command.
trusted
trusted — The default prevents the ToS field to not be remarked by egress network IP interfaces
unless the egress network IP interface has the remark-trusted state set
untrusted — Specifies that all egress network IP interfaces will remark IP packets received on the
network interface according to the egress marking definitions on each network interface.
unnumbered [ip-address | ip-int-name]
no unnumbered
config>router>interface
This command sets an IP interface as an unnumbered interface and specifies the IP address to be used
for the interface.
To conserve IP addresses, unnumbered interfaces can be configured. The address used when
generating packets on this interface is the ip-addr parameter configured.
An error message will be generated if an unnumbered interface is configured, and an IP address
already exists on this interface.
The no form of the command removes the IP address from the interface, effectively removing the
unnumbered property. The interface must be shutdown before no unnumbered is issued to delete
the IP address from the interface, or an error message will be generated.
ip-addr | ip-int-name — Optional. The IP address or IP interface name to associate with the
unnumbered IP interface in dotted decimal notation. The configured IP address must exist on this
node. It is recommended to use the system IP address as it is not associated with a particular
interface and is therefore always reachable. The system IP address is the default if no ip-addr or
ip-int-name is configured.
no unnumbered
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
