Table of Contents
Advertisement
description
Syntax
Context
Description
Default
Parameters
shutdown
Syntax
Context
Description
Default
mh-secondary-interface
Syntax
Context
Description
Page 142
netmask — The subnet mask in dotted decimal notation.
Values
0.0.0.0 - 255.255.255.255 (nework bits all 1 and host bits all 0).
description description-string
no description
config>router>mh-primary-interface
config>router>mh-secondary-interface
This command creates a text description stored in the configuration file for a configuration context.
The no form of the command removes the description string from the context.
no description
description-string — The description character string. Allowed values are any string up to 80
characters long composed of printable, 7-bit ASCII characters. If the string contains special
character (#, $, space, etc.), the entire string must be enclosed within double quotes.
[no] shutdown
config>router>mh-primary-interface
config>router>mh-secondary-interface
The shutdown command administratively disables an entity. The operational state of the entity is
disabled as well as the operational state of any entities contained within. Many objects must be shut
down before they may be deleted.
Unlike other commands and parameters where the default state is not indicated in the configuration
file, shutdown and no shutdown are always indicated in system generated configuration files.
The no form of the command puts an entity into the administratively enabled state.
no shutdown
[no] mh-secondary-interface
config>router
This command creates a loopback interface for use in multihoming resiliency. This address is
considered the secondary multihoming address and is only used to resolve routes advertised by the
primary router in the event that router becomes unavailable. For this purpose, the reachability for this
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
