Alcatel-Lucent 7450 ESS Series Configuration Manual page 421

Default
no interface-disable-sample
match
Syntax match [protocol protocol-id]
no match
Context config>filter>ip-filter>entry
Description
This command enables the context to enter match criteria for the filter entry. When the match criteria
have been satisfied the action associated with the match criteria is executed.
If more than one match criteria (within one match statement) are configured then all criteria must be
satisfied (AND function) before the action associated with the match is executed.
A match context may consist of multiple match criteria, but multiple match statements cannot be
entered per entry.
The no form of the command removes the match criteria for the entry-id.
Parameters protocol — The protocol keyword configures an IP protocol to be used as an IP filter match
protocol-id — Configures the decimal value representing the IP protocol to be used as an IP filter
7450 ESS OS Router Configuration Guide
criterion. The protocol type such as TCP or UDP is identified by its respective protocol number.
match criterion. Well known protocol numbers include ICMP(1), TCP(6), UDP(17). The no form
the command removes the protocol from the match criteria.
Values 0 — 255 (values can be expressed in decimal, hexidecimal, or binary - DHB)
keywords:
igmp, igp, ip, isis, iso-ip, l2tp, ospf-igp, pim, pnni, ptp, rdp, rsvp, stp, tcp, udp, vrrp
* — udp/tcp wildcard
Protocol Protocol ID
icmp 1
igmp 2
ip 4
tcp 6
egp 8
igp 9
udp 17
rdp 27
idrp 45
rsvp 46
gre 47
none, crtp, crudp, egp, eigrp, encap, ether-ip, gre, icmp, idrp,
Internet Control Message
Internet Group Management
IP in IP (encapsulation)
Transmission Control
Exterior Gateway Protocol
Any private interior gateway (used by Cisco for IGRP)
User Datagram
Reliable Data Protocol
Inter-Domain Routing Protocol
Reservation Protocol
General Routing Encapsulation
Filter Policies
Description
Page 421