Table of Contents
Advertisement
match-list
Syntax
match-list
Context
config>filter
Description
This command enables the configuration context for match lists to be used in Filter policies (IOM and
CPM).
ip-prefix-list
Syntax
ip-prefix-list ip-prefix-list-name create
no ip-prefix-list ip-prefix-list-name
Context
config>filter>match-list
Description
This command creates a list of IPv4 prefixes for match criteria in IPv4 ACL and CPM filter policies.
The no form of this command deletes the specified list.
Operational notes:
An ip-prefix-list must contain only IPv4 address prefixes.
An IPv4 prefix match list cannot be deleted if it is referenced by a filter policy.
Please see general description related to match-list usage in filter policies.
Default
none
Parameters
ip-prefix-list-name — A string of up to 32 characters of printable ASCII characters. If special
ip-prefix
Syntax
ip-prefix ip-prefix/prefix-length
no ip-prefix ip-prefix/prefix-length
Context
config>filter>match-list>ip-prefix-list
Description
This command adds an IPv4 address prefix to an existing IPv4 address prefix match list.
The no form of this command deletes the specified prefix from the list.
Operational notes:
To add set of unique prefixes, execute the command with all unique prefixes. The prefixes are
allowed to overlap IPv4 address space.
An IPv4 prefix addition will be blocked, if resource exhaustion is detected anywhere in the system
because of Filter Policies that use this IPv4 address prefix list.
Default
none
7450 ESS OS Router Configuration Guide
characters are used, the string must be enclosed within double quotes.
Filter Policies
Page 433
Advertisement
Table of Contents
