Alcatel-Lucent 7450 ESS Series Configuration Manual page 415

The no form of the command sets the scope of the policy to the default of template.
Default template
Parameters
exclusive — When the scope of a policy is defined as exclusive, the policy can only be applied to a
template — When the scope of a policy is defined as template, the policy can be applied to multiple
sub-insert-credit-control
Syntax sub-insert-credit-control start-entry entry-id count count
no sub-insert-credit-control
Context config>filter>ip-filter
Description
This command inserts point information for credit control for the filter.
The no form of the command reverts to the default.
Default
none
Parameters entry entry-id — Identifies a filter on this system.
count count — Specifies the count.
sub-insert-radius
Syntax sub-insert-radius start-entry entry-id count count
no sub-insert-radius
Context config>filter>ip-filter
Description This command insert point information for RADIUS for the filter.
The no form of the command reverts to the default.
Default none
Parameters
entry entry-id — Specifies at what place the filter entries received from RADIUS will be inserted in
7450 ESS OS Router Configuration Guide
single entity (SAP or network port). Attempting to assign the policy to a second entity will result
in an error message. If the policy is removed from the entity, it will become available for
assignment to another entity.
SAPs or network ports.
Values
1 — 65535
Values 1 — 65535
the filter.
Values
1 — 65535
count count
Filter Policies
Page 415