Table of Contents
Advertisement
interface
Syntax
interface [ip-int-name | ip-addr] [icmp] [urpf-stats] [statistics]
Context
clear>router
Description
This command clears IP interface statistics.
If no IP interface is specified either by IP interface name or IP address, the command will perform the
clear operation on all IP interfaces.
Parameters
ip-int-name | ip-addr — The IP interface name or IP interface address.
icmp — Specifies to reset the ICMP statistics for the IP interface(s) used for ICMP rate limiting.
urpf-stats — - Resets the statistics associated with uRPF failures.
statistics — - Resets the IP interface traffic statistics.
l2tp
Syntax
l2pt
Context
clear>router
Description
This command enables the context to clear L2PT data.
group
Syntax
group tunnel-group-name
Context
clear>router>l2tp
Description
This command clears L2PT data.
Parameters
tunnel-group-name — Specifies a Layer Two Tunneling Protocol Tunnel Group name.
tunnel
Syntax
tunnel tunnel-id
Context
clear>router>l2tp
Description
This command clears L2PT data.
Parameters
tunnel-group-name — Clears L2TP tunnel statistics.
7450 ESS OS Router Configuration Guide
Default
All IP interfaces.
IP Router Configuration
Page 239
Advertisement
Table of Contents
