Alcatel-Lucent 7450 ESS Series Configuration Manual page 113

idle-timeout
Syntax idle-timeout idle-timeout
no idle-timeout
Context config>router>l2tp>group
Description This command configures the period of time that an established tunnel with no active sessions will
persist before being disconnected.
Enter the no form of the command to maintain a persistent tunnel.
The no form of the command removes the idle timeout from the configuration.
Default
no idle-timeout
Parameters idle-timeout — Specifies the idle timeout value, in seconds until the group is removed.
lns-group
Syntax lns-group lns-group-id
no lns-group
Context config>router>l2tp>group
Description This command configures the ISA LNS group.
Parameters
lns-group-id — Specifies the LNS group ID.
load-balance-method
Syntax load-balance-method {per-session|per-tunnel}
no load-balance-method
Context config>router>l2tp>group
config>router>l2tp>group>tunnel
Description This command describes how new sessions are assigned to an L2TP ISA MDA.
Parameters
per-session — Specifies that the lowest granularity for load-balancing is a session; each session can
per-tunnel — Specifies that the lowest granularity for load-balancing is a tunnel; all sessions
7450 ESS OS Router Configuration Guide
Default
no idle-timeout
Values
0 — 3600
Values 1 — 4
be assigned to a different
ISA MDA.
associated with the same tunnel are assigned to the same ISA MDA; this may be useful or
required in certain cases, for example:
• MLPPP with multiple links per bundle;
IP Router Configuration
Page 113