Table of Contents
Advertisement
max-retries-not-estab
Syntax
max-retries-not-estab max-retries
no max-retries-not-estab
Context
config>router>l2tp>group
config>router>l2tp>group>tunnel
Description
This command configures the number of retries allowed for this L2TP tunnel while it is not
established, before its control connection goes down.
The no form of the command removes the value from the configuration.
Default
no max-retries-not-estab
Parameters
max-retries — Specifies the maximum number of retries for non-established tunnels.
password
Syntax
password password [hash | hash2]
no password
Context
config>router>l2tp>group
config>router>l2tp>group>tunnel
Description
This command configures the password between L2TP LAC and LNS
The no form of the command removes the password.
Default
no password
Parameters
password — Configures the password used for challenge/response calculation and AVP hiding. The
hash — Specifies the key is entered in an encrypted form. If the hash parameter is not used, the key
hash2 — Specifies the key is entered in a more complex encrypted form. If the hash2 parameter is
7450 ESS OS Router Configuration Guide
Default
no max-retries-estab
Values
2 — 7
Default
no max-retries-not-estab
Values
2 — 7
maximum length can be up to 20 characters if unhashed, 32 characters if hashed, 54 characters if
the hash2 keyword is specified.
is assumed to be in a non-encrypted, clear text form. For security, all keys are stored in encrypted
not used, the less encrypted hash form is assumed.
Default
no password
IP Router Configuration
Page 115
Advertisement
Table of Contents
