Alcatel-Lucent 7450 ESS Series Configuration Manual page 432

tcp-ack
Syntax
Context
Description
Default
Parameters
tcp-syn
Syntax
Context
Description
Default
Parameters
Page 432
tcp-ack {true | false}
no tcp-ack
config>filter>ip-filter>entry>match
This command configures matching on the ACK bit being set or reset in the control bits of the TCP
header of an IP packet as an IP filter match criterion. Note that an entry containing L4 match criteria
will not match non-initial (2nd, 3rd, etc) fragments of a fragmented packet since only the first
fragment contains the L4 information.
The no form of the command removes the criterion from the match entry.
no tcp-ack
true — Specifies matching on IP packets that have the ACK bit set in the control bits of the TCP
header of an IP packet.
false — Specifies matching on IP packets that do not have the ACK bit set in the control bits of the
TCP header of the IP packet.
tcp-syn {true | false}
no tcp-syn
config>filter>ip-filter>entry>match
This command configures matching on the SYN bit being set or reset in the control bits of the TCP
header of an IP packet as an IP filter match criterion. Note that an entry containing L4 match criteria
will not match non-initial (2nd, 3rd, etc) fragments of a fragmented packet since only the first
fragment contains the L4 information.
The SYN bit is normally set when the source of the packet wants to initiate a TCP session with the
specified destination IP address.
The no form of the command removes the criterion from the match entry.
no tcp-syn
true — Specifies matching on IP packets that have the SYN bit set in the control bits of the TCP
header.
false — Specifies matching on IP packets that do not have the SYN bit set in the control bits of the
TCP header.
7450 ESS OS Router Configuration Guide