Table of Contents
Advertisement
port
Syntax
Context
Description
Default
Parameters
proxy-arp-policy
Syntax
Context
Description
Page 132
port port-name
no port
config>router>interface
This command creates an association with a logical IP interface and a physical port.
An interface can also be associated with the system (loopback address).
The command returns an error if the interface is already associated with another port or the system. In
this case, the association must be deleted before the command is re-attempted. The port-id can be in
one of the following forms:
•
Ethernet interfaces
If the card in the slot has MDAs, port-id is in the slot_number/MDA_number/port_number
format; for example, 1/1/3 specifies port 3 of the MDA installed in MDA slot 1 on the card
installed in chassis slot 1.
•
SONET/SDH interfaces
When the port-id represents a POS interface, the port-id must include the channel-id. The POS
interface must be configured as a network port.
The no form of the command deletes the association with the port. The no form of this command can
only be performed when the interface is administratively down.
No port is associated with the IP interface.
port-name — The physical port identifier to associate with the IP interface.
Values
port-id
[no] proxy-arp-policy policy-name [policy-name...(up to 5 max)]
config>router>interface
This command enables and configure proxy ARP on the interface and specifies an existing policy-
statement to analyze match and action criteria that controls the flow of routing information to and
from a given protocol, set of protocols, or a particular neighbor. The policy-name is configured in the
config>router>policy-options context.
slot/mda/port[.channel]
ccag-id
ccag-id.path-id[cc-type]
ccag
id
path-id
cc-type
lag-id
lag-id
lag
id
7450 ESS OS Router Configuration Guide
keyword
1 — 8
a, b
.sap-net, .net-sap
keyword
1 — 200
Advertisement
Table of Contents
