Table of Contents
Advertisement
SONET/SDH
IPCP
SONET/SDH
BCP-Null
SONET/SDH
BCP-Dot1q
match
Syntax
Context
Description
Parameters
Page 424
-
0
0 — 4094
sdp-id — The SDP identifier.
Values
1 — 17407
vc-id — The virtual circuit identifier. This value is used to validate the VC ID portion of each mesh
SDP binding defined in the service. The default value of this object is equal to the service ID.
Values
1 — 4294967295
http-redirect url — Specifies the HTTP web address that will be sent to the user's browser.
Values
255 characters maximum
match [frame-type 802dot3 | 802dot2-llc | 802dot2-snap | ethernet_II]
no match
config>filter>mac-filter>entry
This command creates the context for entering/editing match criteria for the filter entry and specifies
an Ethernet frame type for the entry. When the match criteria have been satisfied the action associated
with the match criteria is executed.
If more than one match criteria (within one match statement) are configured then all criteria must be
satisfied (AND function) before the action associated with the match will be executed.
A match context may consist of multiple match criteria, but multiple match statements cannot be
entered per entry.
The no form of the command removes the match criteria for the entry-id.
frame-type keyword — The frame-type keyword configures an Ethernet frame type to be used for
the MAC filter match criteria.
Default
802dot3ethernet_II
Values
802dot3, 802dot2-llc, 802dot2-snap, ethernet_II
802dot3 — Specifies the frame type is Ethernet IEEE 802.3.
802dot2-llc — Specifies the frame type is Ethernet IEEE 802.2 LLC.
802dot2-snap — Specifies the frame type is Ethernet IEEE 802.2 SNAP.
The SAP is identified by the channel. No BCP is
deployed and all traffic is IP.
The SAP is identified with a single service on the
channel. Tags are assumed to be part of the customer
packet and not a service delimiter.
The SAP is identified by the 802.1Q tag on the channel.
7450 ESS OS Router Configuration Guide
Advertisement
Table of Contents
